VIAIR Corporation - 2on2 High-Pressure Bolt-On Platform with Crossmember Bracket

Using two high output compressors mounted to a 2.0 gallon, 5-port air tank all required components are included to allow the installation of a high pressure onboard air system that provides 200 PSI maximum pressure. Available as a model-specific bolt-on application for 2007-2011 Jeep JK with a crossmember mounting bracket – 2on2 systems all come complete with an easy-to-install wiring harness and manifold to make wiring and plumbing the system straight forward.

Fits the following applications:

'07-'11 Jeep Wrangler JK 2 Door
'07-'11 Jeep Wrangler Unlimited JK 4 Door

Part #: 30005

Specifications:

– 12-Volt
– 2.54 CFM
– Permanent Magnetic Motor
– Duty Cycle: 100% @ 100 PSI
– Max. Working Pressure: 200 PSI
– Max. Amp Draw: 44 Amps
– Ingress Protection Rating: IP67
– Dimensions: 18.5″L x 5.9″W x 13.5″H
– Net Weight: 30 lbs.

Pre-Installed:

– 2.0 Gallon 5-Port Air Tank
– (2) 380C Air Compressors
– (2) 1/4” Stainless Steel Braided Leader Hoses
– (2) 1/4” JIC Fittings on Leader Hoses
– 1/4” NPT Swivel to 1/4” NPT Swivel
– T-Fitting (Remote Mount Filter)
– 1/4” NPT Drain Cock
– Sealed Pressure Switch with Delphi Connectors (165 PSI On, 200 PSI Off)
– (2) Loomed Compressor Wires Terminated with Delphi Connectors
– Inline Fuse Holder with Fuse
– 1/4” NPT Safety Valve
– (4) 1/4” NPT M Recessed Plugs

Included In Kit:

– Crossmember Mounting Bracket
– 60-amp Fuse & Fuse Holder
– 80-amp Relay
– (2) 1/4” BSP Adapters for Air Lockers
– T-Fitting 1/4″ NPT F x 1/4″ NPT F x 1/4″ NPT M
– 1/8″ to 1/4″ NPT Reducer
– Wiring Harness with Delphi Connectors
– (2) Delphi Connector Plug Kits
– Billet 1/4” NPT x 6-Port Manifold and Mounting Bracket
– Air Filter Housing with Installed Element
– (2) Replacement Air Filter Elements
– Dash Panel Air Pressure Gauge (0-200 PSI Illuminated)
– Air Pressure Regulator
– 15ft. DOT Air Line

Fill Rates:

– 2.0 GALLON TANK FILL RATE
0 to 200 PSI - 2 min. 35 sec. (± 10 sec.)
165 to 200 PSI - 40 sec. (± 05 sec.)

– 37″ X 12.5″ FILL RATE
0 to 30 PSI - 5 min. 00 sec. (± 15 sec.)
15 to 30 PSI - 2 min. 30 sec. (± 10 sec.)

– 40″ X 15.5″ FILL RATE
0 to 30 PSI - 5 min. 25 sec. (± 15 sec.)
15 to 30 PSI - 2 min. 40 sec. (± 10 sec.)